How to restore Asus EEE Pad TF101 stock Image on Linux

DISCLAMER : This method does not target all TF101 Tablet.

First Activate Nividia APX mode, by pressing [Vol UP] and [POWER]. You shloud only get a black screen. Connect the tablet to your computer with the USB cable.

Verify with lsusb the APX mode is activated.

% lsusb
Bus 002 Device 008: ID 0955:7820 NVIDIA Corp. T20 [Tegra 2] recovery mode

Retrieve an official image from Asus ( ) and unzip it. After unpack images from the binary blob file. The utilities can be found here .

./blobunpack ./WW_epad-user-

Bypass the SBK 2 with wheelie to access the APX.

sudo ./bins/wheelie -2 -c ./transformer.bct --bl ./bootloader.bin -o 0x300d8011

Modify the config file ./flash.cfg to point to the file extracted from the blob.

And finally flash your tablet.

sudo ./bins/nvflash -r --bct ./transformer.bct --setbct --configfile ./flash.cfg --create --odmdata 0x300d8011 --sync

Also for windows


YouTube channel's RSS Feed

At Google, usually, they do things in a rather efficient and ergonomic way. But on the monitoring of subscribed channels, they screwed up failed! It is almost impossible to know if there is a new video, only with the small numerical indicator present in the list of channels!

As an RSS feed user, I thought, ‘it would be cool to have YouTube channels that I subscribed in my feed aggregator (TinyTinyRSS)’. So I asked Google.

Result : Use RSS with YouTube

So the link of a YouTube channel is also the link to its RSS feed!

Little example: DATA GUEULE channel’s RSS feed:

Just Almost perfect! Indeed, sometimes it does not work!

After analysis, it appears that when the aggregator tries to retrieve the feed, it is (usually) automatically redirected to the real URL of the feed:

So in case of problems with the first URL format, go for the second one (or directly uses the latter).

Redshift - Save your eyes

Redshift update the color temperature of your screen according to the moment of the day.
During the day your screen have a « normal » color (5700 K) and when the night comes the temperature go down progressively.
So during the night your screen will have a red tint.

This will help your eyes and also reduce the blue light effect.( the blue light enable the production of melatonine by your body, that prevent you to sleep.)

To install and configure on Arch

Install Redshift

yay redshift

If you have an issue with geolocalisation check your parameter in gnome settings.
And also in geoclue :

sudo vim /etc/geoclue/geoclue.conf

You may need to add:


To finish create and modify the config file for redshift :

vim .config/redshift.conf

; Global settings for redshift  
; Set the day and night screen temperatures  

; Enable/Disable a smooth transition between day and night  
; 0 will cause a direct change from day to night screen temperature.  
; 1 will gradually increase or decrease the screen temperature.  

; Set the screen brightness. Default is 1.0.  
; It is also possible to use different settings for day and night  
; since version 1.8.  
; Set the screen gamma (for all colors, or each color channel  
; individually)  
; This can also be set individually for day and night since  
; version 1.10.  

; Set the location-provider: ‘geoclue’, ‘geoclue2’, ‘manual’  
; type ‘redshift -l list’ to see possible values.  
; The location provider settings are in a different section.  

; Set the adjustment-method: ‘randr’, ‘vidmode’  
; type ‘redshift -m list’ to see all possible values.  
; ‘randr’ is the preferred method, ‘vidmode’ is an older API.  
; but works in some cases when ‘randr’ does not.  
; The adjustment method settings are in a different section.  

; Configuration of the location-provider:  
; type ‘redshift -l PROVIDER:help’ to see the settings.  
; ex: ‘redshift -l manual:help’  
; Keep in mind that longitudes west of Greenwich (e.g. the Americas)  
; are negative numbers.  

; Configuration of the adjustment-method  
; type ‘redshift -m METHOD:help’ to see the settings.  
; ex: ‘redshift -m randr:help’  
; In this example, randr is configured to adjust screen 1.  
; Note that the numbering starts from 0, so this is actually the  
; second screen. If this option is not specified, Redshift will try  
; to adjust _all_ screens.  

Piwigo - SimpleNG and BatchDownloader

Modify the file:


and add at the line 12 :

	{foreach from=$PLUGIN_INDEX_BUTTONS item=button}

UnRaid Change Keyboard Layout

To change the keyboard layout we need to install loadkeys command.
1. Go to packages directory

cd /boot/packages

2. Download kbd package which contains loadkeys comand


3. Install package by rebooting or manually



installpkg kbd-1.15.2-i486-1.txz 

4. Load your keyboard map

loadkeys fr # for French keyboard

Pré-processeur Warning & Error

#error "Du Texte"
#warning  "Un autre Texte"

Avec #error la compilation échoue. C’est utile pour empêcher la compilation d’un code mal configuré ou non fonctionnel.

Et avec #warning le journal de compilation affiche le « message » ce qui peut être utilisé pour alerter sur une fonction non implémentée ou obsolète.